Find us on Facebook Follow us on Twitter Check out our YouTube Channel
    • SUBSCRIBE

    HIGH OUTPUT RACE COIL KITS

    32221 views
    225 replies
    1 rating 2 rating 3 rating 4 rating 5 rating
    • Member since
      July, 2005
    • From: Beer Town USA
    HIGH OUTPUT RACE COIL KITS
    Posted by modmachz on Tuesday, November 13, 2012 8:28 PM

    I HAVE THE ORIGINAL H/O 1 RACE COIL KITS AVAILABLE,THESE COILS WILL INCREASE SPARK BY UP TO 3 TIMES STRONGER THAN YOUR STOCK COILS,UTILIZE A MUCH WIDER AIR GAP,EASIER STARTING, CLEANS UP LOW END GARBLE,QUICKER THROTTLE RESPONSE,.ALSO IN MOST CASES WILL KEEP YOUR STATOR AND CDI FROM GOING OUT, AND THIS HAS BEEN PROVEN OVER AND OVER AGAIN ON THE SKIDOO PRODUCTS ESPECIALLY THE TRIPPLES, BUT CAN BE APPLIED TO ANY SLED OR IGNITION.THESE ARE THE CORRECT COIL KITS, DO NOT BE MISLED FROM OTHERS ON USING A CERTAIN MARINE COIL COULD BE HAZARDOUS TO YOUR SLEDS HEALTH!!!

    THESE ARE SOLD AS A KIT INCLUDING COIL, TERMINAL,BOOT,MSD RACEWIRE 8.5MM RED or black IN COLOR. I also will Taylor the wire to your Needs . A MUST FOR ANY RACER OR HOT TRAIL GUY THAT WANTS TO KEEP AHEAD OF THE COMPETETION!FOR ALOT LESS THAN A MSD IGNITION.THESE KITS ARE CHEAPER THAN OEM AND ALOT BETTER.

    CALL FOR INFO OR ORDERING:

    414-852-3534

    DONNY..

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      October, 2011
    Posted by sledracer69 on Wednesday, November 14, 2012 6:53 AM

    how much$ and where will you ship too?

    • Member since
      February, 2007
    Posted by 28-dragracer on Wednesday, November 14, 2012 7:47 AM

    Can you send  me the price and more info on the HO/Coil Kits. My E-mail is ICEMAN28@comcast.net. Thanks

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Wednesday, November 14, 2012 9:38 AM

    Emails sent

    11/14/12

    Donny

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      May, 2010
    Posted by 98KILL3RMACHZ on Wednesday, November 14, 2012 10:07 AM
    Send me a price and info too please Thank you.
    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Wednesday, November 14, 2012 11:36 AM

    Send E mail address so I can get Pictures to those that need them..

    I will have new pics available tonite

    Thanks for the interest in my coil kits

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      May, 2010
    Posted by 98KILL3RMACHZ on Wednesday, November 14, 2012 4:25 PM
    camarojz28@yahoo.ca
    • Member since
      September, 2006
    Posted by meathead on Wednesday, November 14, 2012 6:06 PM

    meatheadtf@hotmail.com info and price

    • Member since
      July, 2005
    Posted by Cat-Racer on Wednesday, November 14, 2012 7:36 PM

    catracer440@hotmail.com  info and price on the HO coil kit too........

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Wednesday, November 14, 2012 10:15 PM

    All pictures and pricing sent to those that asked today 11/14/12

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      October, 2005
    Posted by F3doodoo on Thursday, November 15, 2012 5:11 PM

    pics and pricing to  rick7343@yahoo.ca

    Do you attach them to the harness?

    Thx..

    • Member since
      October, 2012
    Posted by SkunkWorks on Friday, November 16, 2012 9:09 PM
    Info and pricing to kyumlor@hotmail.com

    Thanks.
    • Member since
      November, 2005
    • From: Upper Peninsula of Michigan
    Posted by Indy 650 on Friday, November 16, 2012 11:31 PM

    Pics and pricing to tpedrotti@baccoconstruction.com

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Saturday, November 17, 2012 8:24 AM

    E mails sent with pics.

    except Kyumlon@hotmail.com  kept coming back to me.

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      July, 2005
    • From: Montoursville, Pa
    Posted by Pro-X Barry on Saturday, November 17, 2012 5:22 PM

    price and pics for a polaris twin to: bbrit47@cox.net

    • Member since
      February, 2008
    Posted by sledhead-2 on Sunday, November 18, 2012 7:35 AM

    can you send pricing,info and pics to jtilbury@persona.ca

    Thanks

    • Member since
      October, 2012
    Posted by SkunkWorks on Sunday, November 18, 2012 7:42 AM
    Sorry about that, its kyumlor@hotmail.com

    Thanks.
    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Sunday, November 18, 2012 7:10 PM

    hopefully all e mails were answered !!

    Thanks for all the interest!!!

    Donny...

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      October, 2012
    Posted by SkunkWorks on Sunday, November 18, 2012 10:35 PM
    Didnt get an email. Kyumlor@hotmail.com

    Thanks
    • Member since
      June, 2006
    Posted by jabber on Monday, November 19, 2012 8:22 AM

    Could you send pic and pricing for a tripple to djalbert@persona.ca

    • Member since
      February, 2008
    Posted by sledhead-2 on Monday, November 19, 2012 9:25 AM

    no e mail yet... jtilbury@persona.ca

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Monday, November 19, 2012 4:18 PM

    New E mails Sent!!

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      May, 2010
    Posted by snow-doo on Monday, November 19, 2012 9:44 PM

    Is there any adverse effect on changing to this type of coil than the stock ones .Do they mount on the intake flanges? Pictures to dickavery44@gmail.com and price.Thanks

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Tuesday, November 20, 2012 6:30 PM

    Snow Doo You Have e mail.

    Thanks..

    Donny...

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      February, 2008
    Posted by sledhead-2 on Wednesday, November 21, 2012 11:57 AM

    No e mail.... try  jtilbury@gwrr.com

    Thanks

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Friday, November 23, 2012 5:57 PM

    Did everybody that was lloking for info get the e mail I sent out???

    Thank you all for the recent orders!!

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      November, 2005
    • From: Upper Peninsula of Michigan
    Posted by Indy 650 on Saturday, November 24, 2012 10:21 AM

    send to tpedrotti@baccoconstruction.com

    • Member since
      November, 2011
    Posted by impxcr02800 on Saturday, November 24, 2012 12:11 PM

    Send pics and pricing for ski doo tripple to chris6997zrtmod@yahoo.com..

        Thank you in advance!!

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Wednesday, November 28, 2012 7:30 PM

    e mails and pics sent  11/28

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    • Member since
      July, 2005
    • From: Beer Town USA
    Posted by modmachz on Thursday, December 06, 2012 10:09 AM

    Orders From This week 12/3 have all been built and shipped.

    Thankyou..

    Home Of The Original H/O Coil Kits , Hand Held Starting Units , And the New Billet M-18 Battery Mounts.

    CNC Oil Tank Neck Inserts

    Join our Community!

    Our community is FREE to join. To participate you must either login or register for an account.

    Sign up for our free newsletter

    Users Online

    There are no community member online
    More great sites from Kalmbach Publishing Co.