Find us on Facebook Follow us on Twitter Check out our YouTube Channel
    • SUBSCRIBE

    Parting Out Drag Project - Updated - New Parts / BELTS

    4476 views
    24 replies
    1 rating 2 rating 3 rating 4 rating 5 rating
    • Member since
      May, 2008
    Parting Out Drag Project - Updated - New Parts / BELTS
    Posted by Iam47 on Wednesday, October 12, 2016 9:07 PM
    Skidoo drag sled built, ran twice and then lost interest.  All parts virtually new unless otherwise stated. Cash or certified cheque only. More pa
    rts to come, email if you need something not listed below.  USD, can ship from USA if required.
     
    BELTS - All BN in packaging.
     - Dayco HP3009 - $35.00
     - Dayco HP3025 - $35.00
      
    UPDATE: 
     
    - Wahl cleated track, Part # 02-448A…132”  43-9580, 40 Cleats, 28 lbs - (used) - $150.00
    - 600 Triple tuned race pipes - $400.00
    - Custom Sno Pro style drag hood - $225.00
     
    - 600 Triple CS trail pipes w/ flanges - $350.00 SOLD 
     - Ultimax XS821 - $80.00 - SOLD
    - Leather jacket / Joe Rocket pants (men's M / 34" pants) - $200.00 for all. SOLD
    - Asphalt track, 136" x 15, 2.52 pitch - $400.00  SOLD
    - Drag rad, dual electric fans (used) - $150.00  SOLD
    - Custom asphalt skiis, 5" wheels, Wahl aluminum hoops - $400.00  SOLD
     STILL AVAILABLE - Rear suspension front arm adjusters, similar to Wahl style, billet aluminum - $95.00  SOLD
    - Aluminum Clutch Cover (DSA) (Top & bottom) - $100.00 - SOLD
    - CS aluminum Motor Plate (DSA) - $90.00 - SOLD
    - Wahl drag seat (new re upholstery). - $125.00 - SOLD 
    - Light Weight Trailing Arms w/ Spindles (DSA) - $125.00 - SOLD
    - Engine torque arm kit (set of 2) - $80.00 - SOLD
    Picked 136" grass track, COSDRA legal (used) - $350.00 - SOLD
    - Digatron DT-34, 4 window EGT, 3 cables included (used) - $250.00 - SOLD
    VDO Extreme Tach, 11,000 RPM - $325.00 - (SOLD)
    - Wahl cleated ice suspension 02-118A….132”, 27 lbs - (used) – $225.00 - SOLD
    - Kelsey Hayes drive shaft mount brake caliper - $100.00 - SOLD
    - Wave rotor w/ hub - $100.00 - SOLD
    - AC Sno Pro brake lever w/ reservoir - $40.00 - SOLD
    - Dual fuel tank assy w/ mount and fuel fittings (used) - $75.00 - SOLD 
    - Wahl lever style Kill Switch - $20.00 - SOLD
    - Wahl Nose Cone w/ Scorpion Fiberglass Windshield (custom paint but never used) - $275.00 - SOLD
     
    Cell - (204)392-7948
    • Member since
      August, 2014
    Posted by ski doo 1164 on Thursday, October 13, 2016 6:38 PM

    Wahl cleated ice suspension (used) – $225.00 what lengh is the suspension ?

    Digatron DT-34, 4 window EGT, 3 cables included (used) - $250.00

    can u send pic to skidoo1164@yahoo.com

     

    • Member since
      May, 2008
    Posted by Iam47 on Thursday, October 13, 2016 8:50 PM
    Will get length this weekend and pics of skid. Digatron pics sent. Ron
    • Member since
      May, 2013
    Posted by TxTodd on Thursday, October 13, 2016 10:26 PM
    If the wahl skid is for a 112" or 121"(34 or 37 cleats) I will take it.
    • Member since
      July, 2007
    Posted by polaris 650 on Saturday, October 15, 2016 9:27 PM

    I'm interested in the hood.  Can you send me some pics of it. Thanks. Nick. Nnelson6388@gmail.com. thank

    • Member since
      May, 2008
    Posted by Iam47 on Saturday, October 15, 2016 10:08 PM

    Pics emailed.

     

    Ron

    • Member since
      May, 2008
    Posted by Iam47 on Sunday, October 16, 2016 10:56 AM
    VDO, Digatron, dual tanks sold. Thx Ron
    • Member since
      May, 2008
    Posted by Iam47 on Sunday, October 16, 2016 3:30 PM

    From the part # on the track, it looks like the track and suspension are 132" Can anyone tell me what to measure to make sure the suspension is for this track setup (c to c with rear scissor up or down?......). It came included in a package so I haven't used it as I don't ice race. Thx Ron.

    - Wahl cleated track, Part # 02-448A…132” 43-9580, 40 Cleats, 28 lbs - (used) - $150.00

    - Wahl cleated ice suspension 02-118A….132”, 27 lbs - (used) – $225.00

    • Member since
      May, 2008
    Posted by Iam47 on Monday, October 24, 2016 8:52 PM
    Updated. Thx Ron
    • Member since
      July, 2005
    Posted by 1FASTXC on Wednesday, October 26, 2016 8:59 AM

    Can you send pics of the wave rotor to 1fastxc@bayland.net

    "Slightly stock"
    • Member since
      May, 2008
    Posted by Iam47 on Friday, October 28, 2016 7:47 PM

    Pics sent.

     

    Ron

    • Member since
      May, 2008
    Posted by Iam47 on Wednesday, November 02, 2016 9:15 PM

    Grass track, cleated suspension and kill switch sold.  thx Tyler.

     

    Ron

    • Member since
      May, 2008
    Posted by Iam47 on Friday, November 11, 2016 11:36 AM

    List updated.

    • Member since
      May, 2008
    Posted by Iam47 on Sunday, November 13, 2016 9:45 PM
    UPDATE:
    - Light Weight Trailing Arms w/ Spindles (DSA) - $125.00
    - CS aluminum Motor Plate (DSA) - $90.00
    - Leather jacket / Joe Rocket pants (men's M / 34" pants) - $200.00 for all.
    - Aluminum Clutch Cover (CK3) (Top & bottom) - $100.00
    - Engine torque arm kit (set of 2) - $80.00
    • Member since
      June, 2009
    Posted by diehard 700 on Thursday, November 17, 2016 4:38 AM
    Please send pics of trailing arms and spindles Davebrookside@gmail.com
    • Member since
      May, 2008
    Posted by Iam47 on Sunday, November 20, 2016 8:35 AM

    Just pending payment on those.  Will let you know if they come available.

     

    Rotor, caliper, brake lever sold - Thx John

    Nose Cone Sold - Thx Nic

     

    Ron 

    • Member since
      September, 2013
    Posted by perryracing63 on Thursday, November 24, 2016 1:23 PM

    Are trailing arms and spindles still available if so email me @ wesperry1963@gmail.com.   Also motor plate

    • Member since
      May, 2008
    Posted by Iam47 on Thursday, November 24, 2016 2:49 PM

    Trailing arms and spindles are pending payment.  motor plate is still available.

     

    Ron

    • Member since
      September, 2013
    Posted by perryracing63 on Friday, November 25, 2016 10:02 AM

    Plz let me know on spindles and a arms if it falls through 

    • Member since
      May, 2008
    Posted by Iam47 on Friday, November 25, 2016 11:32 AM

    For those who enquired about the billet rear suspension frt adjusters - they are again available.   These mount on the outside of the chassis to allow for quick adjustment.  Similar to Wahl style.  $95.00

     

    Ron 

    • Member since
      September, 2013
    Posted by perryracing63 on Thursday, December 01, 2016 3:48 PM

    Is motor plate for ckiii 3 and how much do you want for it

    • Member since
      May, 2008
    Posted by Iam47 on Wednesday, December 07, 2016 9:15 PM

    Trailing arms (DSA) and motor torque arms sold.  Thx Scott.

    Motor plate is available - $90.00 - It is for DSA not CK3.  My mistake.  Information posted above has been corrected.

    Rear suspension adjusters still available.  Custom fab, similar to Wahl style - $95.00

    Ron

    • Member since
      May, 2008
    Posted by Iam47 on Friday, December 16, 2016 10:09 PM

    Motor plate & clutch cover sold - Thx Terence.

    Seat sold - Thx Blaine.

     

    Ron

    • Member since
      May, 2008
    Posted by Iam47 on Friday, March 31, 2017 10:20 PM
    Track, Skiis, leathers, frt adjusters, rad sold. Thx Adam. Ron
    • Member since
      May, 2008
    Posted by Iam47 on Sunday, April 23, 2017 4:22 PM
    CS pipes sold. Thx James.

    Join our Community!

    Our community is FREE to join. To participate you must either login or register for an account.

    Sign up for our free newsletter

    Users Online

    There are no community member online
    More great sites from Kalmbach Publishing Co.