Find us on Facebook Follow us on Twitter Check out our YouTube Channel
    • SUBSCRIBE

    proline skid in f chassis Mach z

    1700 views
    7 replies
    1 rating 2 rating 3 rating 4 rating 5 rating
    • Member since
      December 2009
    proline skid in f chassis Mach z
    Posted by outlaw fab shop on Wednesday, March 11, 2015 3:56 PM

    does anybody out there have dimensions for mounting a proline skid in a f chassis mach z? I am mostly concerned with the front arm mounting holes such as distance from top of tunnel to center line of front arm mounting and or driver centerline to arm location in the front. if anybody has any of this info available please reply here thank you very much.

    forgot to mention, its a 121 tunnel and putting in a 136

    Mark

    • Member since
      July 2005
    • From: Anchor Bay MI
    Posted by chines on Wednesday, March 11, 2015 5:20 PM

    I have a proline in a F chassis and used the stock front holes.You go up or down according to how you set up your sled.

    Self proclaimed President, Southeastern Muskamoot Bay Drag Racing Association. 5 members, and a few more that I'm considering.no dues. God bless the second amendment and thank god for the fifth.

    Any engineer can design an a-s-shole, they need an operator to make it s-hit!

    • Member since
      December 2009
    Posted by outlaw fab shop on Wednesday, March 11, 2015 6:55 PM

    chines

    I have a proline in a F chassis and used the stock front holes.You go up or down according to how you set up your sled.

     

    i forgot to mention, its a 121 tunnel and putting in a 136

    • Member since
      July 2005
    • From: Anchor Bay MI
    Posted by chines on Thursday, March 12, 2015 8:34 AM

    That's what mine is,a 136 replaced the 121.You will need to move the rear mount point,but the front is original.

    Self proclaimed President, Southeastern Muskamoot Bay Drag Racing Association. 5 members, and a few more that I'm considering.no dues. God bless the second amendment and thank god for the fifth.

    Any engineer can design an a-s-shole, they need an operator to make it s-hit!

    • Member since
      December 2009
    Posted by outlaw fab shop on Thursday, March 12, 2015 10:30 AM

    Thanks chines!!! Could I possibly contact u later tonight by phone? U can message me with # I'm just in Clinton Twp

    Mark

     

    • Member since
      July 2005
    • From: Anchor Bay MI
    Posted by chines on Thursday, March 12, 2015 6:04 PM

    PM'd you.

    Self proclaimed President, Southeastern Muskamoot Bay Drag Racing Association. 5 members, and a few more that I'm considering.no dues. God bless the second amendment and thank god for the fifth.

    Any engineer can design an a-s-shole, they need an operator to make it s-hit!

    • Member since
      January 2014
    Posted by schaff on Friday, March 13, 2015 1:10 PM

    I bought a used proline and e mailed them for wear to mount it the wear very good and sent me all the specks

    • Member since
      December 2009
    Posted by outlaw fab shop on Friday, March 13, 2015 8:25 PM

    schaff

    I bought a used proline and e mailed them for wear to mount it the wear very good and sent me all the specks

     

    called and left messages but no return callsConfusedcare to share the info, lol

    mark

    Join our Community!

    Our community is FREE to join. To participate you must either login or register for an account.

    Sign up for our free newsletter
    By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.

    Users Online

    There are no community member online
    More great sites from Kalmbach Publishing Co.