Snowmobile tech: Ask the experts
On call after-market experts from Hauck Powersports, Speedwerx, Straightline Performance, G&G Powersports and Woody's Traction answer your questions.
|
|
Rate:
Sort Posts:
|
machz975
Joined on
02-02-2008
|
looking on where to start on clutching and gearing for 660 on a c/s 670 imp in a s chassie and a ashhalt set up thanks pm me
|
|
Experts
Joined on
01-18-2007
|
In order to give accurate information on gearing other information is
drastically needed. Peak engine RPM HP, torque curve, and broadness of power
are just some of the other variables. Straightline Performance tech
dept.
|
|
machz975
Joined on
02-02-2008
|
155 hp at8500 with a lighten mxz s chassie 48mm c/s carbs crank shop motor inprove pipe with good traction please pm me thanks
|
|
dyna-tek racing
Joined on
07-28-2005
|
 machz975:
155 hp at8500 with a lighten mxz s chassie 48mm c/s carbs crank shop motor inprove pipe with good traction please pm me thanks
here is something that we used
CF1
310-460
hollow pin with three sets
50-47 cam
beije at 22pds
23-44 gearing for ice
there will never be anything better than testing so get your parts together and start making runs and trying new stuff, good luck.
master mechanic-outboard,sterndrive,pwc,snowmobile.
dynamometer facility
crank repair -cylinder repair-trail and race motors-shock service
clutch machining and balancing.
complete racer support- free technical support-racer discount programs
Todd Guthrie 1-260-316-2839 or www.caseyscove.com click on dyna-tek
|
|